| After-sales Service: | a Year |
|---|---|
| Warranty: | a Year |
| Type: | Logo |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier | Decal introduction People in the market always call them "LED car stickers, LED panel kit, LED power decals, LED backlight logo, LED illuminated signs, LED car signs..." Each LED decal is a super bright LED backlit logo that sticks on to the inside of your vehicle's window (no tools required). The battery operated device automatically turns on while the car is in motion and it's dark out. When the sensors detect no motion for 2 minutes or that it's light out, the sign light shuts off. Just set it and forget it. An indicator light on the inside tells you if it's on or not. Because it's a bright light, you can see it through tinted windows too. About the "motion", i want to explain more in case some one misunderstand it. the "motion" is a generalized description of the "action". it's not only the meaning of the car is in driving, pls note that there is no any directly connect between the car and the sign, the sign cannot receive a "signal" say the car is driving... Straightly speaking, the vibration caused by friction between car and road, that's the one of the main reasons for activating the sign, The vibration when the moment of the car starts up, the acceleration of the car, also may will activate it, these all belongs to "motion", when the car is stop there in dark place, if you slap/beat the car, this action also will let the sign light up... In some cases, even if the car is in motion, if the decal senses non-movement, the decal will not light up under this condition... Each "decal" consists of a 4-inch circular graphic image, and a rear housing that provides backlighting via an LED light. The housing also contains light and motion detectors, so that once the power switch is turned on, the light will only come on in the dark, and only when the vehicle is in motion - once the vehicle has stopped moving for at least two minutes, the light automatically shuts off. The device mounts on the glass via two adhesive-backed clips. It can slide in and out of them, should you wish to alternate between displaying different LED logo sign in the same location. Power is supplied by 3 * AAA alkaline batteries, which are said to provide approximately more than 40 hours of run time. |
| One box: 100PCS Weight: 12KG Outer box size: 51.5*32*30CM |
| NEWS arrival: Version A: above described decal has multiple sensor technologies ( motion sensor and light sensor) We also have it only with light sensor... the sign will light up when it's dark no matter it's in driving or the car is stop there, this is version B because there is no motion sensor, the sign will not light off automatically when you park your car, pls remember to press the button to turn off the power. the product defaults to Version A the one with motion sensor and light sensor when you place the order. If you need the version B only with light sensor, pls advise when you place the order. |
| Decals installation: is very important that the sign is placed in the lower right side of your font windshield or nowhere else, use caution when opening and closing rear window or doors where unit is mounted. For best results mount in flat window area. STEP 1 Clean window surface where where sign is mounted, make sure it's dry completely. STEP 2 Peel off protective tape to expose 3M adhesive on window clips STEP 3 Press firmly against window for at least 30 seconds, then apply pressure directly to the clips for another 30 seconds. STEP 4 Instal 3 pcs AAA alkaline batteries, press the button to turn on the sign. that's the end of installation. |
| Trouble Shooting 1. My decal doesn't turn on. Make sure you already turn on the battery power. Device first senses for darkness and then vehicle movement before it lights up. Device will only light up if both conditions are prevalent. You may test by placing device in any dark environment, tap or shake device to simulate driving movement. 2. My decal window clips are not sticking to vehicle window. If window has any cleaner residue from car wash this might cause a problem. Clean window surfaces using rubbing alcohol to remove any oil, grease or residue and let dry 100%. Always install in moderate non-humid temperature range of 50 to 80 degrees F. To reinstall make sure to use a new set of window mounting clips. 3. My decal doesn't shut OFF after 2 minutes once parked? Simply reset by turn off the battery and turn on again. 4. My decal is not as bright as when it was first purchased? Replace with new batteries. Disclaimer As the purchaser, you assume all risk and responsibility whatsoever for any and all losses or damages to persons or property including consequential damages arising from the use of any product or service purchased from us, whether or not occasioned by our negligence or based on strict product liability or principles of indemnity or contribution. We do not assume or authorize any person or entity to assume liability on behalf of us in connection with the use of any product or service. We make no representation that our product offerings are appropriate or legal for use inside or outside China. You are responsible for all compliance with your local laws and use of our product offerings where illegal are expressly prohibited. |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}