|
LED Illuminated Car Logo Details:
Product Name: 5D Logo Light
Size: Diameter 11cm
Applicable Models: Golf 6 GOLF, Magotan, CC, Tiguan, BORA, Scirocco Front Log
o Lights: Red, Blue, White / Choose one
Power Supply: DC12V+/-10%
Wire Length: 0.25 meters
Power: 2 (W)
Voltage: 12 (V)
Current: 0.3 (A)
Gross/Net Weight per Piece: 0.1kg+/-10%
Packaging: Color box packaging
Quantity: 100 boxes/case
Gross/Net Weight: 13/10 KG
Case Dimensions: 43X37X73CM
Outer Material: ABS
Light Core: 3528 0603
Tools Needed for Installation: Please prepare the following tools before starting: 1. Flat-head screwdriver 2. Phillips screwdriver 3. Insulation tape 4. Towel 5. Pliers
Installation Instructions:
- First, place a towel next to the car logo on the trunk, and use a flat-head screwdriver to pry the logo. The towel is to prevent scratches on the car body.
- Be sure to peel off the double-sided adhesive from the car body first, and pry with moderate force, not too hard, bit by bit, and it will come off slowly, then clean the double-sided adhesive from the car logo and the car body.
- Use a Phillips screwdriver to remove the partition inside the trunk, be careful as some areas have clips, carefully remove the soundproofing board to see various wires.
- Now, install the car logo light. The power wire of the car logo light passes through one of the logo positioning holes, into the car compartment, tear off the single-sided adhesive on the back of the car logo light, while pulling the wire, stick the car logo light to the car body, and press firmly.
- The car logo light is installed, now connect the power. The car logo light should be connected to the power supply of the rear license plate light, so that when the night light is turned on, the car logo light will also turn on at the same time, find the power connector of the rear license plate light.
- First, unplug the plug, strip a mouth for the positive and negative poles, expose the wire core, connect the wires with red to red, black to black, don't forget to wrap with insulation tape, and finally plug the plug back in! Reinstall the trunk cover soundproofing board.
|
FAQ:
1. Can you give me a sample order of EL cold light film stickers?
2. A: Yes, we welcome samples to test and check the quality. Mixed samples are acceptable. You can also provide your sample or sample pictures to us. We will design the shape of the LED car sticker according to your requirements.
1. Q2. What about the delivery date?
A: It takes 2-5 days for samples and 1-3 weeks for mass production.
The third season. Is there a minimum order quantity limit for LED car stickers?
A: MOQ, we can provide 1 sample for inspection.
The fourth quarter. How do you ship the goods and how long will it take you to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Sea and air transport are also optional.
Q5. How to order LED car stickers?
A: Please tell us your requirements.
We will offer the price according to your request or suggestion. Confirm sample and place official order. We will arrange the production.
Q6. Can my logo be printed on LED car sticker products?
A: Yes, please confirm the sample and inform us formally before production.
Q7: How do I handle the fault?
A: Our products are produced under a strict quality control system with a defect rate of less than 0.1%.
During the warranty period, we will have a small number of new orders to replace the LED car sticker. For unqualified bulk goods, we will repair and send them to you again, or we can discuss solutions according to the actual situation, including recall.
Do you offer a warranty on the product?
A: Yes, our products have a 1-year warranty.
){kind=link}